Instant Provisionals

Consistent, Quality overdentures in minutes

Good Fit ® Instant Overdentures are pre-fabricated prostheses in a variety of tooth molds and shades, festooned and with an adjustable, high-impact denture base. They can be adapted and fitted in minutes, providing fast, quality overdentures and provisionals.

PRE-MADE
ADJUSTABLE
HIGH-IMPACT

JUST ADAPT & PLACE

Here's how to use them...

Step 1: Choose Appropriate Setup and Shade

The Instant Overdentures are available in six sizes (six pairs of upper and lower setups - which can be used together or individually - each with unique combinations of tooth molds selected for ideal occlusion and aesthetics), and each size is available in multiple shades (see Mold & Shade Guide for details).

Step 2: Heat Overdenture to Make It Moldable

Heat overdenture in a water bath (90-100°C for 2-3 minutes) until moldable. Hotter temperatures for longer times make the overdentures more moldable. Cooler temperatures for shorter times make them less moldable (which can be useful for making detailed, minor adjustments).

Step 3: Align, Position and Adapt Overdenture

Align and ideally position the overdenture on a model or directly in patient’s mouth.

They can be adjusted to accommodate a wide variety of arch widths, occlusal schemes, or existing dentition.

To trim flanges or make more space for implants, grind the overdentures as needed with an acrylic bur.

Step 4: Check Positioning

Check positioning, occlusal spacing, and midline. If further adjustments are needed, you can reheat entire overdenture or portion of overdenture you’d like to adjust.

Step 5: Reline and Place Overdenture

Reline with a cold- or light-cure material (e.g. Triad ®). Then place the overdenture back in the patient’s mouth to mold material to the implant abutments and ridge.

When satisfied with the results, just cure the reline material and place overdenture.

Quality Teeth for Natural-Looking dentures

Good Fit ® Instant Overdentures feature four-layer, cross linked, wear-resistant, acrylic teeth that are manufactured to meet strict international quality standards.

Their detailed color, morphology and anatomy combine to help you provide aesthetic, natural-looking dentures.

Acrylic Resin Teeth for Removable Prostheses Type I (Anteriors) and Type II (Posteriors)

ANTERIORS

In Size S1

In Size M1

In Size M2

In Size L1

In Size L2

In Size L3

In Size S1

In Size M1, M2, L1 & L2

In Size L3

POSTERIORS

In Size S1

In Size M1 & M2

In Size L1, L2 & L3

SIZING KEY (all sizes in mm)

Anteriors

A - width of 6 anteriors on flat plane
B - length of central without collar
C - width of central

Posteriors

A - average width of 1x4 set of upper posteriors
B - average width of 1x4 set of lower posteriors
C - average depth of upper left first molar
D - average depth of lower left first molar

ARTICULATION (Molds Used in Each Size of Instant Overdenture)

Good Fit ® Instant Overdentures are available in six sizes (setups). Here are the specific tooth molds used in each size, which you can also use as an articulation guide (e.g. for placing an Instant Overdenture against a partial denture)...

Size S1(Smallest)	Mold	A	B	C	D
Upper Anteriors	GU1	44.1mm	9.9	7.8
Lower Anteriors	GL1	32.1	8.2	4.7
Upper & Lower Posteriors	GP1	29.3	31.8	8.6	8.2

Size M1	Mold	A	B	C	D
Upper Anteriors	GU2	43.0	9.8	8.3
Lower Anteriors	GL3	34.6	9.4	5.0
Upper & Lower Posteriors	GP2	31.6	34.6	8.6	8.6

Size M2	Mold	A	B	C	D
Upper Anteriors	GU3	44.6	9.5	8.3
Lower Anteriors	GL3	34.6	9.4	5.0
Upper & Lower Posteriors	GP2	31.6	34.6	8.6	8.6

Size L1	Mold	A	B	C	D
Upper Anteriors	GU4	43.2	10.5	8.4
Lower Anteriors	GL3	34.6	9.4	5.0
Upper & Lower Posteriors	GP3	32.0	35.2	9.4	8.9

Size L2	Mold	A	B	C	D
Upper Anteriors	GU5	46.5	10.8	8.8
Lower Anteriors	GL3	34.6	9.4	5.0
Upper & Lower Posteriors	GP3	32.0	35.2	9.4	8.9

Size L3(Largest)	Mold	A	B	C	D
Upper Anteriors	GU6	48.5	10.8	9.0
Lower Anteriors	GL5	36.5	12.2	5.7
Upper & Lower Posteriors	GP3	32.0	35.2	9.4	8.9

TOOTH SHADES

Good Fit ® Instant Overdentures can be produced in any of the A#-D# shades corresponding to the Vita ® Classical Shade Guide*.

We typically stock the more popular shades (e.g. A1, A2, and B1), with additional shades available for future or special orders. Please contact us for currently available shades or if you need additional shades.

* A#-D# correspond to the Vita ® Classical Shade Guide, which is meant to be a guide, not a match.

BASE SHADES

Good Fit ® Instant Overdentures are currently available in one base shade:

Pink Veined

(An approximation of DENTSPLY’s Lucitone 199® “Original” shade)

We have a wide variety of additional base shades available for future or special orders. In the near term, please contact us if you need additional shades.

CHOOSING THE CORRECT SIZE IN YOUR LAB OR CLINIC

The detailed mold guide on the previous pages can help you choose the correct size of Instant Overdenture for your case, but we have an even easier way...

THE GOOD FIT ® TRANSPARENT SIZE-SELECTION GUIDE

On the next page, you will find a copy of a size-selection guide that, when printed, shows the actual arch size of each of the available sizes of Instant Overdentures.

We print it on a transparent sheet for you, so you can use it as follows:

Working with a model: just place the arches on the transparent guide over the arch of your model to choose the correct size

Working directly in the mouth: use a caliper or similar device to measure the arch size of the patient and then compare it to the arches on the transparent guide.

Remember, when selecting a size, you are looking only for the closest match - not necessarily a perfect match - because you will then be able to adapt the arch to get a more custom fit.

Please wait... We are processing your payment and this may take few seconds.

Support and sales